Summary:Method 2 for handling leakage at the sewer inspection port:
You can use glass adhesive to apply a film around the area where the water pipe has ruptu......
Method 2 for handling leakage at the sewer inspection port:
You can use glass adhesive to apply a film around the area where the water pipe has ruptured or where the drain pipe has leaked. After that, do not use water too quickly. Wait until the next day to use water and try to see if the water pipe under the balcony has been repaired. If there is no leakage, it indicates that the glass adhesive has already bonded the leaking area together. If you encounter such problems in the future, you can buy some adhesives, glass adhesives, and other products to solve them
If the interface between the sewer inspection port and the sink is loose, tighten it, or use a cloth tape coated with adhesive to wrap it around the interface with the sink. Then, do not use this water pipe for drainage. The next day, if there is still leakage and the water pipe is not broken, it is best to try replacing it with a new water pipe. Many times, it is caused by aging of the water pipe.
English
简体中文
France
España
العربية
